Devoran Metals UK reinforcing bar supplier
About Devoran Metals - Cornwall based suppliers ofsteel reinforcement and productsDevoran Metals accessories for use in the steel reinforcement of concreteDevoran Metals product range of reinforcement bar, reinforcemt fabric, screed rails, corrugated beam form, gabions and weldmesh productsDevoran Metals range of chemicals for use in the steel reinforcement of concreteContacting Devoran Metals for your steel reinforcementssteel reinforcements in cornwall home page
Devoran Metals Ltd - Reinforcement Bar
steel reinforcement bar suppliers steel mesh and steel fabrics steel gabions suppliers Devoran Metals
screed rails - concrete and steel for industrial concrete floors corrugated beam form for ground beams and pile caps weldmesh stockists south west ukl - Devoran metals UK


Devoran Metals Ltd has large stocks of reinforcement bar, in all sizes is held in stock coupled with the latest automated bar bending and cutting machinery enables fast turn around times from the point of order.
Reinforcement shape codes to BS8666:2005
steel reinforcing bar shapes code and bending schedule
Down load shape codes guide and minimum dimensions guide
Reinforcement shapes code.pdf here
Properties of high yield bars
Bar Size (mm)
6*
8
10
12
16
Dims (Max O/A mm)
7
10
12
14
19
Mass (Kg per m)
0.22
0.395
0.616
0.888
1.579
Meters per tonne
4504
2531
1623
1126
633
Bar Size (mm)
20
25
32
40
50*
Dims (Max O/A mm)
23
29
37
46
58
Mass (Kg per m)
2.466
3.854
6.313
9.864
15.41
Meters per tonne
405
259
158
101
64

* 6mm and 50mm are nono preferred sizes available to special order.


Tolerances on cutting & bending dimensions
The tolerances for cutting and / or bending dimensions shall be in accordance with the table below and shall be taken into account when completing the schedule. The end anchorage or the dimension in parentheses in the shape codes specified in the table below shall be used to allow for any permissible deviations resulting from cutting and bending.
Tolerances on cutting and bending
Tolerance (mm)
Cutting of straight lengths
(Incl. reinforcement for subsequent bending)
+25 -25
Bending <1000mm
Bending <1000mm to <2000m
Bending >2000mm
 +5 - 5
+5 - 10
+5 - 25


Radius of Bending
Reinforcement to be formed to a radius exceeding that specified in the table below shall be supplied straight. The required curvature may be obtained during placing. For shapes with straight and curved lengths (e.g. shape codes 13 and 33) the largest practical radius for the production of a continuous curve is 200mm, and for the larger radii the curve may be produced by a series of short straight sections.
Properties of high yield bars
Bar Size (mm)
6*
8
10
12
16
Radius ( mm)
2.50
2.75
3.50
4.25
7.50
Bar Size (mm)
20
25
32
40
50*
Radius ( mm)
14.00
30.00
43.00
58.00
75.00
steel bar reinforcing and concrete wire reinforcing products
Cut and Bent Reinforcement
Devoran Metals brochure for cut and bent reinforcing steel bar
>
 High yield reinforcing bar to BS4449:2005 in diameters 8mm to 40mm*
>
 6mm and 50mm are non-preferred sizes available to special order
>
 All cut and bent reinforcement conforms to the relevant British Standard.
>
 Devoran Metals Ltd services and distributes across the south west of England
>
 Galvanised Rebar available
>
 Stainless Steel available

*BS4449:2005 does not cover mild steel
New Brochure
 Available









Prefabricated reinforcement
Devoran Metals provide prefabricated solutions to meet individual requirements. Whether it is to help skill shortages or to speed construction, Devoran Metals expertise can assist by providing a solution to your specific requirements or skill levels
steel bar reinforcing supplier
pile and mesh reinforcement supply


reinforcement prices

“Nicholls Builders always try to promote the sourcing of materials from local companies. Devoran Metals endeavour to meet our requirements with regards to cost and delivery, and have been dependable to supply at short notice.”
Mark Bevans, John Nicholls Builders Ltd.

Devoran Metals Ltd - Cornwall's specialist supplier of steel reinforcement bar for concrete. stockists of all sizes of steel bar, Automated bar bending service for cut and bent reinforcement and prefabricated reinforcement facilities . Strategically placed for the south west for prompt service
Devoran Metals 2006 site map