Reinforcing Fabric

Devoran Metals provide a complete range of CARES approved steel fabric for all your reinforcing needs. Reinforcing fabric (or mesh) is a large sheet of reinforcing bars electrically welded together to form a grid at either 200mm, 100mm or 400mm centres. All fabrics Devoran Metals supply conforms to British Standard BS4483:1998 or 2005

We hold comprehensive stocks of all reinforcement fabric available for same day collection or delivery direct to site. Strategically placed in the South West we are able to respond quickly to the needs of our customers whilst offering excellent customer service and competitive prices.

All standard fabrics (A, B, C & D) are supplied in 4.8 x 2.4m sheets.

A142 and A393 are also available from stock in merchant 3.6 x 2m sheets.

Mesh Table of sizes

Standard Reinforcing Fabric

Standard steel fabrics have a 100mm overhang on all four sides of the mesh. Typically, standard fabrics will be specified in most applications and are often used in RC slabs, footings and retaining walls. Depending on the application, the type of fabric required will be specified by a structural engineer based on load calculations.

As a general rule of thumb, for every 4.8 x 2.4m sheet allow approximately 1 sheet of fabric per 10m2 (including laps). For every merchant 3.6 x 2m sheet allow approximately 1 sheet of fabric per 6m2 (including laps).

 

Standard Fabric Image

Flying-End Reinforcing Fabric

In certain situations, such as thin slabs where not much cover is available, flying-end fabric will be specified. Structurally, flying-end fabric performs in the same way as standard fabric; the only difference is the omission of 2 bars on each cross section, leaving an overhang of 500mm on two sides of the fabric.

This increased overhang allows the fabric to be laid next to each other or on top of each other, which optimises the cover and reduces steel congestion within the slab.

Flying End Fabric Image

 

^ Back to products